15
3)
Using the FILE Up/Down buttons, move
the selector-arrow to the desired option
(see below) and then press the SELECT
button.
• Cancel:
Returns to the previous
“MANUAL” menu without saving any
changes.
• 1 - 5:
Selects the specific default Series
(S1 through S5) that will be overwritten with
the new settings. A prompt will appear,
asking for confirmation of the Series
Number (example below):
4)
Move the selector-arrow to the desired
option (see below) and then press the
SELECT button.
• Yes:
Saves the changes to the selected
Series. The following menu will appear, with
asterisks indicating the changed Series and
File Names in capital letters and the File
renamed to “USER DEFINED FILE“
(example below):
IMPORTANT:
This “Yes” command will
overwrite the current settings in the
selected Series. To restore the default
Series settings to this Series, either re-
enter the previous settings manually or
Recall the Factory Setup (see page 16).
• No:
Returns to the previous “MANUAL”
menu without saving any changes.
• Cancel:
Returns to the previous
“MANUAL” menu without saving any
changes.
2. SERIES MODE
- By default, the unit will
start in this Series Mode. This Mode allows
the user to quickly access up to five
different Series (see Chart 1 on page 8 for
the default Series). These default Series
settings can be customized by the user --
refer to the Editing Series instructions on
page 20.
Note:
To switch to Manual Mode from this
Series Mode, simply change any speed or
torque settings using the keypad buttons.
The Display will automatically change to
Manual Mode.
Save To Series 1?
> Yes
No
Cancel
*
S1-SERIES 1
*
F1-USER DEFINED FILE
8:1 550 RPM 132 g-cm
Save To Which Series?
> Cancel
1
2 (etc...)
Содержание AEU-27A
Страница 1: ...AEU 27A Electronic Endodontic System OPERATION AND MAINTENANCE INSTRUCTION MANUAL...
Страница 15: ...13...
Страница 34: ...32 NOTES...