Aseptico AEU-27A, Инструкция по эксплуатации и техническому обслуживанию, Страница: 16 / 36

14
GENERAL OPERATION:
Figure 6
Keypad Functions:
Note: When selecting the following Keypad Functions, use the SERIES and FILE Arrow Buttons
and the SELECT/EDIT Button (see Fig. 6) to navigate through the menu options:
Menu SELECT
& EDIT
Torque
Increase/
Decrease
Auto-Stop-
Reverse/
MAX Torque
Calibration (single press)
System Setup (press & hold)
• SETUP OPTIONS:
- Recall Factory Setup
- Auto Stop Reverse
- Reverse Beeper
- Torque Warning
- Accessory Warn
- Sleep Mode
- Keypress Beep
- System Volume
- Save Settings
- Cancel
Speed
Increase/
Decrease
Motor Direction
Forward/Reverse
Ratio/Handpiece
Selection
Individual
FILE Selection
Navigate
Up/Down
SERIES
Selection
Navigate Left/Right
After the user has become familiar with the system’s keypad functions, use either 1. Manual
Mode, or 2. Series Mode below to begin operation:
1. MANUAL MODE - At any time, the user
can use the control panel keypad to adjust
the ratio, speed, torque, and forward/
reverse settings. When the ratio, speed, or
torque are changed manually, the Display
will indicate Manual Mode, as shown below:
Note: To escape out of Manual Mode and
switch to the Series Mode, simply press
either of the two SERIES arrow buttons.
A. Saving Manual Settings: At any time,
the user can save and store new ratio,
speed, and torque settings into any one of
the five different default Series. Follow
these steps to save new Manual settings:
1) Use the keypad buttons to change the
ratio, speed, or torque settings. The
Display will indicate Manual Mode.
2) Press and hold the EDIT button. Two
beeps will sound and then the following
Save Menu will display:
MANUAL MODE
8:1 550 RPM 132 g-cm