110112
O. Front panel
P. Gas sensor
Q. Front air flow inlet
R. Remote control
2. Filters and Purification Stages
2.1. Washable Prefilter
Captures larger particles such as dust, pollen, mold, pet dander and hair to prolong the life of the
HEPA filter and can be hand washed (rinsed) when dirty.
2.2. True HEPA Filter
This unit features a combination filter that consists of two layers with the first being a true HEPA filter
and the other is an activated carbon. The true HEPA filter captures particulates as small as 0.3micron
including germs, bacteria, viruses and other airborne contaminants. The carbon filter removes odors.
2.3. Ultraviolet Germicidal Lamps
The ultraviolet germicidal lamps (UV type ‘C’) can destroy residual bacteria and viruses as they pass
by.
2.4. Photocatalytic Oxidation Chamber:
The photocatalytic oxidation chamber decomposes toxic gases, odors and viruses from the air 300
times more effectively than standard activated carbon filters. The chamber is maintenance free as it
has the ability to self-clean itself and never needs replacing.
2.5. Dust and Gas sensors
These sensors continually sample the ambient air to determine and show graphically the air quality.
When in
Auto mode
, the unit will automatically adjust its fan speed to deal with changes in the
concentrations of dust and/or gases.
3.
Control Panel Buttons
3.1. Power Button
The large circular button on the far right hand side of the control panel is used to turn the unit on and
off.
3.2. Fan Speed Button
This button is used to set one of the 4 different fan speeds with each speed being indicated by a
different colored ring of light around the On/Off button.
Turbo
is the highest speed and is indicated
by a red ring,
Strong
is indicated by an orange ring,
Middle
is indicated by a blue ring and
Silent
is
indicated by a green ring. Pressing the fan speed button in the Auto Mode or Purify Air mode will
switch the unit to Manual mode.
3.3. Purify Air Button
This button is used to turn the
Purify Air mode
on or off.
3.4. Auto Button
This button is used to turn the
Auto mode
on or off.
