ascon KX6, Инструкция по эксплуатации

Страница: 23 / 28

Ascon Tecnologic - KX6 - ENGINEERING MANUAL -
PAG. 23
]
AL1 group
no. Param. Description
Dec.
Point
Values Default
19
AL1t
Alarm 1 type 0
nonE Alarm not used;
LoAb Absolute low alarm;
HiAb Absolute high alarm;
LHAo Windows alarm in alarm outside the windows;
LHAi Windows alarm in alarm inside the windows;
SE.br Sensor Break;
LodE Deviation low alarm (relative);
HidE Deviation high alarm (relative);
LHdo Relative band alarm in alarm out of the band;
LHdi Relative band alarm in alarm inside the band.
HiAb
20
Ab1
Alarm 1 function 0
0... 15:
+1 Not active at power up;
+2 Latched alarm (manual reset);
+4 Acknowledgeable alarm;
+8 Relative alarm not active at set point change.
0
21
AL1L
- For High and low alarms, it is the low limit
of the AL1 threshold;
- For band alarm, it is low alarm threshold
dp From -1999 to AL1H (E.U.) -1999
22
AL1H
- For High and low alarms, it is the high
limit of the AL1 threshold;
- For band alarm, it is high alarm threshold
dp From AL1L to 9999 (E.U.) 9999
23
AL1
AL1 threshold dp From AL1L to AL1H (E.U.) 0
24
HAL1
AL1 hysteresis dp 1... 9999 (E.U.) 1
25
AL1d
AL1 delay 0 From 0 (oFF) to 9999 (s) oFF
26
AL1o
Alarm 1 enabling during Stand-by mode and
out of range conditions
0
0 Alarm 1 disabled during Stand by and out of range;
1 Alarm 1 enabled in stand by mode;
2 Alarm 1 enabled in out of range condition;
3 Alarm 1 enabled in stand by mode and in out of
range condition.
0
]
AL2 group
no. Param. Description
Dec.
Point
Values Default
27
AL2t
Alarm 2 type 0
nonE Alarm not used;
LoAb Absolute low alarm;
HiAb Absolute high alarm;
LHAo Windows alarm in alarm outside the windows;
LHAi Windows alarm in alarm inside the windows;
SE.br Sensor Break;
LodE Deviation low alarm (relative);
HidE Deviation high alarm (relative);
LHdo Relative band alarm in alarm out of the band;
LHdi Relative band alarm in alarm inside the band.
Loab
28
Ab2
Alarm 2 function 0
0... 15:
+1 Not active at power up;
+2 Latched alarm (manual reset);
+4 Acknowledgeable alarm;
+8 Relative alarm not active at set point change
0
29
AL2L
- For High and low alarms, it is the low limit
of the AL2 threshold;
- For band alarm, it is low alarm threshold
dp From -1999 to AL2H (E.U.) -1999
30
AL2H
- For High and low alarms, it is the high
limit of the AL2 threshold;
- For band alarm, it is high alarm threshold
dp From AL2L to 9999 (E.U.) 9999
31
AL2
AL2 threshold dp From AL2L to AL2H (E.U.) 0
32
HAL2
AL2 hysteresis dp 1... 9999 (E.U.) 1
33
AL2d
AL2 delay 0 From 0 (oFF) to 9999 (s) oFF
34
AL2o
Alarm 2 enabling during Stand-by mode and
out of range conditions
0
0 Alarm 2 disabled during Stand by and out of range;
1 Alarm 2 enabled in stand by mode;
2 Alarm 2 enabled in out of range condition;
3 Alarm 2 enabled in stand by mode and in out of
range condition.
0