ASCOM UPAC - Скачать руководство пользователя страница 7

Страница: 7 / 103

TD 92483GB

2008-06-05/ Ver. B

Installation and Operation Manual
UPAC- Unite Packet for Messaging and Alarm

1.2

How to Use this Document

This document is used for the installation and configuration of the product, as well as for
the administration and daily operation.

Installation and Basic Configuration

• For installation and basic configuration, refer to chapters

and

• For the basic administration of UPAC, refer to chapters:

Configure the Phonebook

on page 14

Extended Configuration

Some extended configuration is included in the basic licence, other requires an additional
licence, see below:

• For settings included in UPAC Basic - M1/L1 licence.

Refer to chapters:

Basic Configuration

on page 12 (except

4.6.3 Add Locations

)

Absence Handling in DECT

on page 37

Base Station Conversion

on page 38

Open Access Protocol (OAP)

on page 38

• For settings included in UPAC Security Pack - LSP licence.

Refer to chapters:

- as in UPAC Basic - M1/L1 licence
-

4.6.3

Add Locations

on page 27

- chapter

System Supervision and Security

on page 39

ESPA 4.4.4

A message-based serial protocol intended for communication with
external equipment. Built upon the ISO1745 transport specification.

LAN

Local Area Network:
a group of computers and associated devices that share a common
communication line.

Ascom Line protocol A simple alternative to ESPA 4.4.4 with all basic features of paging

call available but with a very limited status report.

SNMP

Simple Network Management Protocol:
standard for management of network equipment.

System 900

Generic term for telePROTECT900 and teleCOURIER 900.

System 9d

Ascom DECT System

teleCARE M

Nurse Call System, built on a local operated network (LON)

teleCOURIER 900

Ascom On Site Paging System

telePROTECT 900

Ascom Personal Security System

Unite

Ascom messaging system that unites different systems, for example
System 900, System 9d, and teleCARE M.

Содержание UPAC -








































































































Результаты поиска

Содержание UPAC -

Отзывы:

Бренды по названию

Популярные бренды

ASCOM UPAC -, Инструкция по установке и эксплуатации

Результаты поиска

Содержание UPAC -

Отзывы:

Бренды по названию

Популярные бренды