TD 92483GB
2008-06-05/ Ver. B
Installation and Operation Manual
UPAC- Unite Packet for Messaging and Alarm
12
4
Basic Configuration
The basic configuration requires
system administrator
or
administrator
rights. With
user
rights you will only be able to access and configure
Users & Groups
and the
Phonebook
.
Authentication Levels and Default Passwords
4.1
Add Users
Figure 9. Users & Groups
The users must be added to UPAC to enable messaging in the system.
1
Click “Users & Groups” on the start page.
2
Enter User name and Password and click “OK”.
3
Select Messaging Users > Users in the menu.
The
Users
page opens.
4
Click the “Add” button.
5
Enter the following settings:
Figure 14.
Figure 15.
Setting
Description
Last Name:
The family name
First Name:
The first (given) name
Call ID:
The Call ID can be numerical or a text string (max 50
characters). Normally the Call ID is set as the same as
the handset phone number.
Number/Address:
The phone number or the personal address within
selected category.
Category:
This is the messaging system to which the handset
belongs, (defined in the Setup Wizard). Update or
adding messaging systems is defined in Other Settings
> Messaging Categories.
Divert to Number/Address: This is the number/address to divert the message to if
the Call ID is not reachable (delivery failure, absent or
out of range).
