TD 92483GB
2008-06-05/ Ver. B
Installation and Operation Manual
UPAC- Unite Packet for Messaging and Alarm
11
3
Authentication Levels and Default Passwords
Figure 7. UPAC start page
UPAC has different authentication levels:
• Using the
Send Message
function, i.e. creating and sending messages can be done by
any user in the system and requires no password.
•
User
rights is required for the administration of users & groups and the phonebook.
Default user name and password are “user” and “password”.
•
Administrator
rights is required for the setup, the configuration and administration of
UPAC, simple troubleshooting and changing passwords (except for the sysadmin
password). Default user name and password are “admin” and “changeme”.
•
System Administrator
rights is used for advanced troubleshooting, gives access to all
administration pages and the permission to change all passwords. Default user name
and password are “sysadmin” and “setmeup”.
3.1
UPAC Configuration Page
Figure 8. UPAC Configuration page
With system administrator or administrator rights you will be able to access the complete
UPAC configuration page from the
Configuration
-,
Phonebook-
and
Users & Groups
buttons on the start page. Links to documentation are also found on the start page.
Figure 11.
Figure 12.
Figure 13.
requires no password
user
sysadmin & admin
010
B
ac
k to st
a
rt p
a
ge B
ac
k to
c
onfigur
a
tion top p
a
ge Add the p
a
ge to f
a
vorites
011
