TD 92319GB
2008-11-10/ Ver. D
User Manual
Ascom i75 VoWiFi Handset
36
14
Alarm Operation
14.1 Acoustic Localisation Signal
A parameter in the handset determines whether or not an Acoustic Localisation Signal
(ALS) should sound after an alarm. The ALS is silenced by pressing the
Mute
button.
14.2 Push-button Alarm
Press the red alarm button twice within two seconds to activate the alarm. An information
text, by default
Personal Alarm
1
, is displayed. The alarm is sent to the alarm central that
distributes it further. After that the handset returns to stand-by mode. Note that you can
always trigger the alarm when you are speaking, editing your settings, or while the phone
is locked.
14.3 Test Alarm
Press and hold the red alarm button until the information text is displayed, default
Test
Alarm
1
.
14.4 No-movement Alarm
Note:
The No-movement alarm requires that the licence option is made available in the
handset. For information on how to add a licence, refer to
Configuration Manual, Ascom
i75 VoWiFi Handset
TD 92431GB
.
You can activate/deactivate the alarm function in the menu, see
15.5.6
Deactivate/
Activate No-movement alarm
on page 46, or by programming a Soft/Hot key as a short-
cut to the function, see
15.5.8
Edit a Soft key
on page 47. The Soft/Hot key changes the
state of the alarm, i.e. if it is deactivated it will be activated and vice verse. Press the Soft
key, or press and hold the Hot key, to put the alarm in or out of operation, respectively.
The
No-movement alarm on
icon on your display is an indication that the No-movement
alarm is in operation.
Send No-movement alarm
The No-movement alarm will go off when you have not moved within a preset period of
time (default 30 seconds). Before the alarm is activated a warning signal sounds and the
No-movement on
icon starts to flash. If you do not cancel the alarm by pressing a key, the
alarm is sent and
No-movement alarm
1
is shown in the display.
Activate No-movement alarm after sending
When a No-movement alarm has been sent, it is made active again by pressing a key or by
moving the handset.
1. The information text can be changed using a parameter in the handset