TD 92319GB
2008-11-10/ Ver. D
User Manual
Ascom i75 VoWiFi Handset
21
8
Basic Operation
8.1
Switch the Handset On/Off
On: Press and hold
until the handset begins to start-up.
Off: Press and hold
until the S
hut down
view opens. Mark “Switch off” and press
“Select”.
Switch off
is displayed until the handset switches off.
8.2
Log a Shared Phone On/Off
The feature shared phone allows more than one user to use a handset. All parameters and
settings that are set in the PDM are loaded to the handset upon logon. Parameters that
are changed in the handset by a logged in user, are stored in the PDM. The message and
call lists are deleted when a new user logs on to the handset.
The handsets are configured to be shared using the PDM. When a handset is configured
to be a shared phone it can be used by any shared phone user in the system. The user
profile must have the “personal phone” parameter disabled. If the user is configured as
personal (i.e. not shared) the handset will become a personal phone upon first log on.
Log on to the handset:
1
Turn on the handset.
2
Enter the user name.
3
Enter the password, navigate using the
keys.
4
Press
“Log on”.
Log off the handset:
1
Long press on-hook.
2
Select log off or switch off.
If the handset does not find the WLAN upon start-up, a “No System” screen is shown. If
the handset does not receive an IP address from the system a “No Access” screen is
shown.
8.3
Turn Audible Signals On/Off
In stand-by mode a long press on the Mute button changes between audible signals on/
off and the
Audio signal off
icon appears/disappears. The icon indicates a completely
silenced handset. Only highest priority messages will override this silent mode.
8.4
Lock/Unlock the Keypad
Press *-key and then press “Lock” to lock the keypad. The
Locked keypad
icon indicates a
locked keypad. Press *-key and then press ”Unlock” to unlock the keypad.
The keypad can also be locked automatically, see
15.5.15
Turn On/Off Automatic Keypad
Lock
on page 49 for more information.
Note:
If a phone lock code has been set, the keypad will not be locked; instead the entire
handset will be locked, requiring you to enter the lock code to unlock it. See
8.5
Lock/
Unlock the Handset
on page 22.
