TD 92319GB
2008-11-10/ Ver. D
User Manual
Ascom i75 VoWiFi Handset
34
12.5.1 Interactive Messages with Function Keys
If there are function keys specified in an Interactive Message, they will be mapped to the
Soft keys and the alphanumeric keys. Function Key ID (A) will be mapped to the left Soft
key, Function Key ID (B) will be mapped to the middle Soft key, and Function Key ID (C) will
be mapped to the right Soft key. Function key IDs (0)–(9) will be mapped to the
corresponding alphanumeric keys.
12.5.2 Interactive Messages without Function Keys
Open an Interactive Message (IM) the same way as an ordinary message. If the IM gives
you several options, mark the one you want and press “Select”. If the selected option
requests input, enter the information needed and press “Select”.
A long press on the “#- key” will change to digit input mode to facilitate entering
numbers.
12.5.3 Multilayer Interactive Messaging
Interactive messages can have multiple layers. A multilayer message have different options
defined for the soft keys. When a soft key is pressed and an option is selected new options
are defined for the soft keys depending on the previous selection.
It is the soft key options that are changed, the text message is unchanged.
12.6 Voice Mail
12.6.1 Receive a Voice Mail
A ring signal and the
New voice mail
icon in the display indicate that a new voice mail has
arrived. You can listen to voice mail by selecting the “Voice mail” entry in the “Messages”
menu.
12.7 Send Data from the Handset
12.7.1 Data Send
It is possible to send user entered data from the handset by pressing a pre-programmed
Hot key or Soft key, or selecting a Service. “Data send” can be used for opening a door,
starting/stopping a machine etc. The data can either be predefined, or entered after the
Hot key/Soft key is pressed or Service is selected.
The data can be predefined when programming the Soft/Hot key or Service, see
15.5.8
Edit a Soft key
on page 47 or
15.4.3
Edit a Service
on page 44.
12.7.2 Send Data with a Prefix
Data with a prefix is sent from the handset by pressing a pre-programmed Hot key or Soft
key or selecting a Service. Data with prefix can be used to send information to an
application in the system. The prefix is predefined by the user when programming the Hot/
Soft key or Service, see
15.5.8
Edit a Soft key
on page 47 or
15.4.3
Edit a Service
on page
44. The data is entered after the Hot key/Soft key is pressed or Service is selected.