ASCOM Ascotel AIP 6350, Системное руководство

Страница: 11 / 64

AIP 6350 / Office 35IP
Initial Installation 11
Tab. 1: System design based on the example of the reference model
3.1.2 Assigning Call Numbers and IP Addresses
The following describes the procedure for sketching the IP terminals into your net-
work's current layout and assigning the call numbers and IP addresses.
Note:
The system operates with permanently assigned IP addresses. DHCP is
not supported.
1. Sketch the IP terminals into your network's current layout.
All the routers, gateways, firewalls and WAN links between AIP and the IP ter-
minals should be visible along with their IP addresses and subnet masks.
2. Enter the call numbers of the IP terminals.
3. Enter the IP addresses of the IP terminals and AIP cards.
The IP addresses must not have a relation to the call numbers. For the initial-
isation values of the IP addresses see the Chapter "Initialisation Values for IP
Addresses", page 48.
4. For each IP terminal enter the IP address of its allocated AIP card.
5. Enter the gateway address for each IP terminal. The gateway address is the
terminal-side IP address of the router that forms the transition to another LAN
area with IP terminals.
Design Explanation
PBX model Ascotel IntelliGate 2025 / 2045 / 2065
IP terminals 5
Voice channels 5 All terminals are able to make and
receive calls simultaneously
AIP Cards 1
DRS modules 1 DRS-08 max. 8 voice channels