AIP 6350 / Office 35IP
Annex
49
7.3
Reference of AIMS Parameters
Listed below are the parameters that can be viewed and modified using AIMS,
together with a brief explanation.
Tab. 27:
Legend
Symbols
Meaning
*
Initialisation value
(..)
Display, not modifiable
<..>
Expected input
Tab. 28:
CM_1_4_5_IP Terminals
Parameters
Parameter values
Explanation
Call Number
(<Subscriber No.>)
Call number of the allocated subscriber
Name
(<Name>)
Name of the allocated subscriber
IP Address
<IP address>
IP address of the IP terminal
Codec
*G.711a
G.711u
G.729
G.711a uses the German tone signalling
method; G.711u, the U.S. method.
Setting valid for all call connections
between this IP terminal and the AIP card.
Frame Length
*10/20/30 ms
Setting valid for all call connections
between this IP terminal and the AIP card
(see "Delay and Jitter", page 40).
Bandwidth Area
1 to 10
Assignment of the IP terminal to a band-
width area
Enabled
(Yes/No)
An IP terminal can only be assigned once
subscriber data has been created for a con-
nection.
State
(Registered/Not Registered/
Upload/No Terminal
Shows the IP terminal's current status
Application SW Version
(<Software version>)
Indicates the version of the application soft-
ware. To update the application software,
see page 54
Boot SW Version
(<Software version>)
Indicates the version of the boot software
Содержание Ascotel AIP 6350
