ASCOM Ascotel AIP 6350, Системное руководство

Страница: 57 / 64

AIP 6350 / Office 35IP
Annex 57
7.6.4 Uploading via an External FTP Server
The load process of the application software of the IP terminals from an external
FTP server is described below. The process for loading the AIP application software
follows the same pattern and is not described separately.
The new software is available in the form of individual files on an external FTP
server. To load the IP terminals with new application software, proceed as follows:
Warning:
Make sure that during the Upload there is no interruption to the power
supply either to the PBX or to the IP terminals.
1. Start the AIMS Upload Manager.
2. From the "Configuration" tab select the PBX, enter the password and config-
ure the PBX connection as indicated in the Ascotel IntelliGate System Manual
(Part 7, Operation and Maintenance).
3. On the "Configuration" tab deactivate the option "PBX as FTP Server".
4. Enter the IP address of the external FTP server, the user name and the access
password.
Note:
For the IP address, always enter the complete address in the format
"xxxx.xxxx.xxxx.xxxx". Alias (like e.g.. "pbx1.upload-center.ch") are not
supported.
5. Switch into the tab "IP terminals" and enter in the field "application soft-
ware" the path and the name of the file with the application software.
6. Start the Upload by clicking "Upload".
The Upload is completed once all the IP terminals have been loaded with the
new software and restarted.
Once the Upload is completed the AIP cards are automatically reactivated and
restarted.
7. On the "IP Terminal" tab check the software version and the following states
for each IP terminal that was scheduled for the Upload:
– "Status=Registered"
– "Upload=Successfully Completed".