ASCOM Ascotel AIP 6350, Системное руководство

Страница: 21 / 64

AIP 6350 / Office 35IP
IP Terminal Office 35IP 21
Fig. 6: Connections on the Office 35IP
To install the Office 35IP proceed as follows:
1. Connect the IP terminals to the power supply.
To do so, first plug the mains connector into the connection socket and only
then connect the RJ45 connector to the terminal's socket.
2. Address the IP terminals in accordance with the instructions in the chapter
"Configuring IP Addresses", page 22.
3. Connect the IP terminals to the network.
As soon as the terminal is connected to the network, it will attempt to register
with the AIP card (see "Registering Process", page 24).
4.2.1 Power Over LAN
If your network supports Power-Over-LAN as per IEEE 802.3af, the Office 35IP can
be powered via the network connecting cable and the mains power supply-unit
is not required (PIN 4/5 and 7/8 on the RJ7 connection).
If the IP terminal is connected to the power supply both via Power over LAN and
the mains power supply unit, it will be powered by whichever source was
connected first.
LAN PC
haz1354aaxxa0