ASCOM Ascotel AIP 6350, Системное руководство

Страница: 16 / 64

AIP 6350 / Office 35IP
16 Initial Installation
3.3.2 Configuring the Default Gateway
To be able to reach IP terminals in other LAN areas, you need to enter the IP
address of the router via which the LAN area of the AIP is to be exited (default
gateway). This entry is superfluous if AIP and all the IP terminals are located in the
same LAN area.
You can define different default gateways for each individual IP terminal or for
groups of IP terminals. As only one default gateway is used in most cases, in the
following enter one default gateway for all registered IP terminals. For more infor-
mation please refer to the Chapter "Static Routes", page 46:
1. Create a static route (CM_1_4_5_Static Routes).
2. Enter the IP address "0.0.0.0".
– "0.0.0.0" covers all the registered IP terminals.
3. Enter the subnet mask "0.0.0.0".
– "0.0.0.0" covers all the LAN areas and subnets.
4. Enter the IP address of the default gateway.
Tab. 5: Default gateway based on the example of the reference model
Static route IP address Subnet mask Default gateway
1 0.0.0.0 0.0.0.0 192.168.104.200