Product Manual
SECTION 4
VIRTUOSO 5460F
115057 REV L
26
4.12 Skirt Sensor System
The skirt sensor system halts the motion of the lift car when an object or person pushes
the safety skirt on the long sides of the lift inward more than 3" [76 mm]. One sensor
assembly is located on each of the two hydraulic cylinders and consists of two
extension springs that run the length of the hydraulic cylinder and two sensor switches
that are actuated by the movement of the springs.
See the figure below for the locations of the sensor switches. To gain access to the
sensor switches, you can:
o
Retract the safety skirt as described in Section 4.4.
o
Move the lift car away from the lower landing with the lower platform gate
open (while overriding the locking rod switch and lower platform gate switch)
until the sensor switches can be accessed from underneath the lift car floor.
Be sure to turn off the lift's main disconnect at the control box and lock it in
the "OFF" position before placing any body parts under the lift car floor.
o
Open a machinery cabinet from the top as described in Section 4.3.
Содержание VIRTUOSO 5460F
