Product Manual
SECTION 4
VIRTUOSO 5460F
115057 REV L
11
4.3 Opening the Machinery Cabinets from the Top
For some of the repairs described in this manual, it is necessary to gain access to a
machinery cabinet from the top. The top of either machinery cabinet can be removed
by performing the following steps:
1. Use a Phillips screwdriver to loosen or remove the five (5) flat head screws located
just underneath the cabinet top on the inside of the lift car. These screws thread into
coupling nuts attached to the other side of the machinery cabinet, and function to
compress the cabinet lid between the sides.
2. Open the interior access panel and push up on the cabinet lid to free the inside
edge. Once the inside edge “pops” out, the lid can be removed by sliding it outward
and upward.
3. For the purposes of servicing, the long coupling nuts may be unthreaded and
removed. Removal of the jam nuts and outside screws is not recommended, as
these cannot be reassembled without removing the lift’s window from outside the lift.
4. To reinstall the machinery cabinet top, perform the above steps in reverse order.
Содержание VIRTUOSO 5460F
