AS MOTOR AS-751 RC Скачать руководство пользователя страница 6 | Manualshive

Страница: 6 / 49

background image

Page 6 / 49

2

SAFETY REGULATIONS

WHENEVER YOU SEE THIS SIGN IN THIS BOOK YOUR SAFETY IS
CONCERNED!

It is the responsibility of the user that the guards are mounted and the available safety equipment
and all safety regulations are employed and observed.

Careful operation is the best guarantee against accidents. Please read this chapter thoroughly
through, before taking the machine in use. All operators, irrespective of their experience, must
read this manual before they use the machine. It is the responsibility of the owner to inform all
operators about secure handling.

Only persons above 18 years of age, who have acquainted themselves with the machine and the
manual, are allowed to operate the machine. The remote control is regarded as a part of the
machine.

The safety regulations are for your safety - therefore

PLEASE REMEMBER

:

1.

Inform everyone, who is to work with or near the machine, about the safety regulations.

2.

Do not start the machine until everyone is aware of your intention.

3.

Never start the machine until all safety guards have been mounted and closed. Replace or
repair missing or damaged guards immediately.

4.

Make sure that everyone near the machine keeps a distance of minimum 15 m to the
machine, when the machine is started and is working.

5.

Stop the motor with the remote control and wait until the machine is completely statio-
nary. Engage the emergency stop contact of the machine and remove the key from the
emergency stop contact before cleaning, lubrication, adjustment or repair of the machine.

6.

No persons, including operators, are allowed to sit on the machine as passengers.

7.

Never leave the machine without stopping the motor and engaging the emergency stop of
the machine and removing the key, so the machine cannot be started by accident.

8.

Always wear a face shield when work is carried out with the machine.

9.

Keep the machine free of objects, which may block its functions.

10.

Never wear loose clothing while working with the machine and keep a safe distance from
rotating parts.

11.

Be ware of warm surfaces and exhaust gases; they could pose risks of getting burnt.

«
...
4
5
6
7
8
...
»

Содержание AS-751 RC


















































Отзывы:

Нет отзывов

Похожие инструкции для AS-751 RC

Бренд: Yard-Man Страницы: 32

Бренд: Ryobi Страницы: 8

Бренд: Qualcast Страницы: 20

pro-turn 460 diesel 992236

Бренд: Gravely Страницы: 51

Бренд: Cobra Страницы: 19

Garden Mark ZYJ-197A

Бренд: Montgomery Ward Страницы: 12

Бренд: Mountfield Страницы: 14

V-RIDE SVR36A-20FX

Бренд: Scag Power Equipment Страницы: 63

Бренд: Honda Страницы: 20

Бренд: Toro Страницы: 2

LMO 18-36 Battery

Бренд: Kärcher Страницы: 252

CZT ELITE Series

Бренд: Bad Boy Страницы: 48

REVOLT BRV36FX691

Бренд: Bad Boy Страницы: 36

Бренд: LawnMaster Страницы: 38

Бренд: MTD Страницы: 8

Бренд: Cub Cadet Страницы: 32

Бренд: Craftsman Страницы: 24

Бренд: Craftsman Страницы: 32

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды