32
| Installation
Aruba 9004-LTE Gateway
| Installation Guide
Figure 36
Mounted LTE Antenna
Your wall mounted antenna extension is now complete.
Outdoor Omni Antenna Extension Instructions: Aruba 90xx-LTE Outdoor Ant
Ext Kit-35ft
The Aruba 9004-LTE gateway provides the option of using additional accessory kits to extend the
Main, Diversity, or GPS antenna mounting for better placement and coverage. This mounting option
allows mounting the Outdoor Omni antenna to a wall or a pole using the provided mounting kits
(Aruba 90xx-LTE Outdoor Ant Ext Kit-35ft).
Required Tools and Equipment - Wall Mounting
The following tools and equipment are required for installing an Outdoor Omni antenna:
Mounting bracket, nut, and washer (attached to the surge protector).
Use 3/4 inch long #6 pan head wood screws for mounting 9004-LTE unit on wood (not included in
the kit).
Use 3/4 inch long #6 pan head wood screws with plastic screw anchor #6-8 x 1 inch on dry wall or
concrete wall (not included in the kit).
Required quantity: 2 screws per bracket
Suitable screwdrivers (not included in the kit)
Installation Steps - Wall Mounting
To install an Outdoor Omni antenna to the wall, perform the following steps:
1. Remove the connector caps from the LTE antenna connectors and secure the extension cable with
the LTE connector on the device. See
step
1 on page 28
through
step
3 on page 29
for details.
2. Remove the wall mounting bracket from the surge protector. Ensure that you keep the nut and
washer secure for installation.
3. Mark the screw hole locations on a wall by aligning with the mounting holes provided in the wall
mounting bracket.
4. Align the mounting bracket to the screw hole on the wall. Secure the bracket with the screws on
the wall. See
Figure 37
.
