Aruba 9004-LTE Gateway
| Installation Guide
Installation |
27
Figure 27
Routing the DC Cable through the Outlet Hole
13.Reinsert the cable grommet into the outlet hole on the rack mount tray.See
Figure 28
.
14.Connect the DC cable into the DC jack on the device.
15.Insert the antenna wires into the wire saddles and attach it to the antenna connectors provided
on the sides of the 9004-LTE gateway. This secures the wires within the wire saddle to keep it in
place.
Figure 28
Inserting the DC cable into the Cable Grommet
Rack mount installation of the 9004-LTE gateway is now complete.
Antenna Extension Instructions
Indoor Antenna Extension Instruction: Aruba 90xx-LTE Indoor Ant Ext Kit-20ft
and Aruba 90xx-LTE Indoor Ant Ext Kit-40ft
The Aruba 9004-LTE gateway provides the option of using additional accessory kits to extend the
Main, Diversity, or GPS antenna mounting for better placement and coverage. You can use the
extension kits (Aruba 90xx-LTE Indoor Ant Ext Kit-20ft or Aruba 90xx-LTE Indoor Ant Ext Kit-40ft)
provided as additional accessories to extend the antenna placement and mount it on any flat surface
such as desktops, shelves, etc., that provide better LTE signal. Or you can wall mount the LTE
antennas using the mounting brackets provided in the antenna extender kits.
