Aruba 9004-LTE Gateway
| Installation Guide
9004-LTE Gateway |
14
absence of an active SIM, or any other reasons, then the gateway boots up with the external
modem connectivity since the external modem is already connected to the gateway before boot
up.
However, if the device is already powered on and the external modem is plugged in to the USB
slot runtime, the external modem does not work and requires the device to reboot to become
functional.
SIM Tray
The 9004-LTE gateway is equipped with a dual nano-SIM tray. At any given time, only one SIM
card is active and functional, the SIM 1 and SIM 2 can not be used simultaneously.
To install a SIM card into the SIM tray, perform the following steps:
1. Insert the SIM ejector needle (provided with package contents) into the small hole on the SIM
Tray. The card tray will pop open. See
Figure 8
.
Figure 8
Opening a SIM Card Tray
2. Pull out the SIM card tray and insert a SIM card, gold contact facing downwards, into the SIM
tray.
3. Push the SIM tray back into the slot. See
Figure 9
.
1
2
