Aruba 8325 Series, Руководство по установке и началу работы

Страница: 37 / 65

Chapter 3 Installing the switch 37
Figure 21: Mounting the switch in a four-post rack
4. Adjust the rear-post bracket ears to fit the depth of the rack.
5. Secure the rear-post brackets to the rack rear posts using four number 12-24 screws.
6. Lock the position of the rear-post bracket ears using the included position-locking screws.
Figure 22: Locking the position of rear-post brackets
7. Install transceivers
You can install or remove a transceiver from an SFP28/QSFP28 slot without having to power off the switch.
• The transceivers operate only at full duplex. Half duplex operation is not supported.
• Ensure the network cable is NOT connected when you install or remove a transceiver.