Aruba 8325 Series, Руководство по установке и началу работы

Страница: 17 / 65

Chapter 2 Introducing the Aruba 8325 Switch 17
Table 10: Port LED behavior for the Aruba 8325-48Y8C (JL624A and JL625A)
Chassis LEDs Function State Meaning
SFP28 port LEDs To display link and
activity information for
the port. On/flashing green Shows a valid link at 25/10 Gbps.
• Fast flashing
1
indicates port
activity at 25 Gbps.
• Slow flashing
2
indicates port
activity at 10 Gbps.
Flashing amber When the Global Status LED is
simultaneously flashing amber,
indicates a port-speed mismatch,
an incompatible, unsupported, or
faulty transceiver, or a port failure.
Off Port is disabled, not connected, or
not receiving a link beat signal.
QSFP28 port LEDs To display link and
activity information for
the port. On/flashing green Shows a valid link at 100/40 Gbps.
• Fast flashing
1
of the Lane 1
LED indicates port activity at
100 Gbps.
• Slow flashing
2
of the Lane 1
LED indicates port activity at
40 Gbps.
Flashing amber When the Global Status LED is
simultaneously flashing amber with
the Lane 1 LED, indicates an
unsupported or faulty transceiver,
or a port failure.
Off Port is disabled, not connected, or
not receiving a link beat signal.
Lanes 2-4 are always off and are
currently unused by HPE-Aruba
software.
Management port Link
LED To display link
information for the port. On green Shows a valid link.
Off Port is disabled, not connected, or
not receiving a link beat signal.
Management port Act
LED To display activity
information for the port. Flashing yellow Flashing indicates port activity.
1
The fast flashing behavior is an on/off cycle once every 0.8 seconds, approximately.
2
The slow flashing behavior is an on/off cycle once every 1.6 seconds, approximately.