4.3.7. MIDI Learn assignment
The MIDI plug icon at the far-right side of the toolbar places the plug-in in MIDI learn mode.
MIDI-assignable parameters will be shown in purple, which means you can map physical
controls to those destinations inside the instrument. A typical example might be to map a
real expression pedal to the Output control, or knobs, faders and buttons on your controller
to the different virtual knobs and switches of the plug-in.
In the image above some of the parameter controls are red. That means they have already
been assigned to an external MIDI control. They can be reassigned, though.
♪
: Remember that you can also assign the Preset Forward and Backward arrows to an external
control.
4.3.7.1. Assign / Unassign controls
If you click on a purple area, you’ll put that control into learning mode. Move a physical
dial, fader, or button and the target goes red, indicating that a link has been made between
the hardware control and the software parameter. There’s a pop-up window that displays
which two things are being linked and an Unassign button that will disconnect the two.
MIDI Learn assignment mode in the Mellotron V
Arturia - User Manual Mellotron V - USER INTERFACE
26
Содержание Mellotron V
Страница 1: ...USER MANUAL...