ARTEX PRODUCTS / ACR ELECTRONICS, INC.
DESCRIPTION, OPERATION, INSTALLATION AND MAINTENANCE MANUAL
ARTEX ELT 4000S
Y1-03-0364 Rev E
Company Confidential
25-62-38
Page
53
of
54
Registration
A.
Responsibility
1)
It is the responsibility of the aircraft owner to register the ELT.
a)
If an ELT is moved to a different aircraft (i.e. an aircraft other than the one it was
originally installed on), and/or the aircraft is registered in a new country, the ELT
must be re-programmed and re-registered.
b)
If the aircraft is registered in a new country, the ELT must be re-programmed and
re-registered.
c)
The product label must be re-marked with the new HEX ID code to indicate new
programming, if applicable.
B.
Required Information
1)
The following information is required when registering an ELT:
a)
The unique Hex ID code printed on the ELT product label.
b)
The information listed below:
1.
Owner’s name
2. Address
3. Telephone number
4. Aircraft type and registration number
5. Any information specific to the registration database
2)
The information (i.e., address, telephone number, etc.), filed as part of the registration
process, should be kept up to date.
C.
Where to Register
1)
In the United States, the National Oceanic and Atmospheric Administration (NOAA) is
the registration agency.
2)
Specific registration web sites and information may be found at:
a)
The ARTEX products web site at
, which has links to on-
line registration sites and also a link to registration forms and instructions for a
number of countries.
b)
An ELT may also be registered in the United States by going directly to the NOAA
ELT registration web site at
http://beaconregistration.noaa.gov
c)
By mail at
SARSAT Beacon Registration
NSOF, E/SPO53
1315 East West Hwy
Silver Spring, MD 20910-9684
or by phone at 1-888-212-7283 or 301-817-4565.
3)
In other countries, the national civil aviation authority in the applicable country should
be contacted to obtain registration information.
