Artesyn PCIE-7210-2-32GB, Инструкция по установке и эксплуатации, Страница: 38 / 82

Functional Description
38 SharpStreamer
TM
Pro Installation and Use (6806800V01B)
3.6 Power
A 12 V power supply is provided to the card through two PCIe gold finger edge connectors
(edge connector 1 and edge connector 2). There is a voltage and current monitor circuit on the
12 V bus to PCH1. This is used to measure the power consumed by card.
The edge connector 1 provides 3.3 V supply to the CPLD and the edge connector 2 provides
3.0 V RTC power to the PCH1 and PCH2.
3.7 Interface Mechanism
3.7.1 High Speed I/O Subsystem
The following are the list of high speed I/O peripherals on the card:

PCIe
– x8 PCIe lanes are connected between standard PCIe card edge connector and each
E3-1578L v5 / E3-1585L v5 processor. Each lane operates at Gen 3 (8 GT/s).
– x8 PCIe lanes are connected between each E3-1578L v5 / E3-1585L v5 processor and
82599 Ethernet controller. Each lane operates at Gen 2 (5 GT/s).
– x1 PCIe lane between the each PCH and the Edge connector 2. Each lane operates at
Gen 2 (5GT/s).

DDR4 Memory (SO-DIMMs)
– Each processor has two DDR4 memory channels in a 1 DIMM per Channel (1DPC)
configuration.
– Memory bus operates at 2133 MT/s.

SATA 3.0 (6 Gb/s)
– Two SATA ports are connected between each PCH and the edge connector 2.
– One SATA port is connected between each Skylake PCH and the on board SSD
module.

USB 2.0
– Two USB 2.0 ports are connected between each PCH and the edge connector 2.
– One USB 2.0 port is connected between each PCH and the front panel USB
connector.