manualshive.com logo in svg

Artesyn PCIE-7210-2-32GB, Инструкция по установке и эксплуатации, Страница: 33 / 82

Поделиться
Скачать
Artesyn PCIE-7210-2-32GB Скачать руководство пользователя страница 33

 

Hardware Preparation and Installation

SharpStreamer

TM

 Pro  Installation and Use (6806800V01B)

33

2.5.1

SharpStreamer Pro Card Installation 

To install the SharpStreamer Pro card, perform the following steps:

1. Use anti static pads and attach an ESD strap to your wrist. Attach the other end of the ESD 

strap to an electrical ground (For more details, refer to the section 

Precautionson page31

).

2. Identify the system in which the SharpStreamer Pro card is to be installed.

3. Remove the system cover.

4. Insert the SharpStreamer Pro card into the PCIe slot, secure it, and ensure the card is 

properly fitted in the PCIe slot. 

5. Lock the slot ejectors, close the system cover, and power on the system. 

2.5.2

SharpStreamer Pro Card Removal

To remove the SharpStreamer Pro card, perform the following steps:

1. Make sure you are in an ESD-safe environment.

2. Power off the system, disconnect the system from the electrical outlet and peripherals and 

remove any cables connected to the card.

For detailed information about the PCIe card installation, refer to the MaxCore product 
documentation.

Make sure that the card has enough air flow after closing the system cover. Refer to the 

MaxCore MC3000 Platform Installation and Use

 manual for setting the fan speed 

accordingly.

The CPU transcoding performance is directly related to the airflow and cooling ability of 
the server in which the card is installed.

The heat sink can be extremely hot. Wait at least 30 minutes for the card to cool down.

Содержание PCIE-7210-2-32GB



















































































Отзывы:

Нет отзывов