Artesyn PCIE-7210-2-32GB, Инструкция по установке и эксплуатации, Страница: 31 / 82

Hardware Preparation and Installation
SharpStreamer
TM
Pro Installation and Use (6806800V01B) 31
2.3.2 Power Requirements
The next table provides the typical power consumed by the SharpStreamer Pro card.
2.4 Precautions
Table 2-2. Power Requirements
Mode PCIe slot power with expansion connector
Idle 63.6 W (+/- 10%)
Active 82.2 W (+/- 10%)
Peak 138W (+/- 10%)
Idle : All two CPUs at Linux login prompt.
Active : When the CPUs are in transcoding state at room temperature.
Peak : When both CPUs are at 95°F / 35°C ambient temperature.
To reduce the risk of personal injury, fire, or damage to the equipment, do not overload the
AC supply circuit that provides power to the chassis.
The card must be powered and connected only to a controlled voltage source.
To avoid shock, make sure that the power cables are connected to a properly wired and
grounded receptacles.
Use ESD
Wrist Strap
Electrostatic Discharge
Do not touch the circuit with bare hands.
The static electricity of the human body may damage the ElectroStatic Sensitive Devices
(ESSDs) on the circuit.
Make sure that you wear an ElectroStatic Discharge (ESD) preventive wrist strap or anti
static glove to prevent the static electricity from hurting you or damaging the device.
Keep your personal objects such as clothes and accessories away from the system. To
prevent the static electricity from damaging the device, it is recommended to wear anti
static clothes.
Pin Damage
If the card is not fully aligned with the interface in the backplane, too much force may
twist the pins on the card or backplane. Do not exert heavy force when inserting the
card.