Touchstone TM402 Telephony Modem User’s Guide
24
Getting
Battery
USB
Ethernet
Safety
Started
Installation
Installation
Drivers
Configuration
Usage
Troubleshooting
Glossary
Installing the Telephony Modem
USB Drivers
Use this procedure to install USB drivers for the ARRIS Touchstone Te-
lephony Modem on a Windows system.
This procedure does not explain how to provision the Telephony Modem
or otherwise initiate actual service.
When you plug the Telephony Modem into the PC’s USB port, Windows
automatically detects the hardware and attempts to install the drivers.
Requirements
Make sure you have the following before attempting to install the USB
drivers:
•
PC with:
— CD-ROM drive
— at least one free USB port
— one of: Windows 98SE, Windows 2000, or Windows ME
(Windows 95 and Windows NT are not supported)
— ARRIS USB Driver CD
•
USB A/B cable provided
•
(for installations not using DHCP) IP address, subnet, gateway,
and DNS information
•
Windows XP does not require the installation of USB drivers
from the CD
How to use this chapter
The following table lists the procedures for installing the USB drivers
on the computer. The procedure is the same regardless of operating
system used.
