Touchstone TM402 Telephony Modem User’s Guide
25
Getting
Battery
USB
Ethernet
Safety
Started
Installation
Installation
Drivers
Configuration
Usage
Troubleshooting
Glossary
Installing USB Drivers
Follow these steps to install USB drivers on a supported Windows oper-
ating system.
Note:
Depending on your operating system, the dialog boxes shown
on your computer may differ slightly from those shown in this
procedure.
1
Make sure the Telephony Modem is on (the Power light should be
on). If not, connect the power supply as described in “Connecting
the Telephony Modem” on page 22.
2
Insert the Touchstone USB Drivers CD.
3
Plug the appropriate end of the USB cable into the Telephony Mo-
dem and the other end into the computer’s USB port.
The PC displays the following window:
—continued—
