Guilin Feiyu Electronic Technology Co., Ltd
Guilin Feiyu Electronic Technology Co., Ltd http://www.feiyudz.cn E-mail: [email protected]
Page 1
FY-602 605 Data Radio configuration instructions
When many Data Radios work together at the same time, in order to avoid interference between
each Data Radio, it is necessary to set different channel configuration for each pairs of Data Radios.But
the Data radios which in the same group must use the same channel and air baud rate, different pairs of
Data radio should set different configuration channel (available channel 1-16).
FY-602 Data Radio configuration instructions
You need through USB-TTL data cable to connect Data Radio to your computer.Also you can
connect it to
“
RF_Module_Soft.exe
”
change Data Radio parameters.
When you connect the Data radio to USB-TTL data cable, you need a 4P connecting wire like the
picture below shows:
Connection must be pay attention to the polarity.
