ARRI SRH-3 Скачать руководство пользователя страница 52

Страница: 52 / 54

Mounting Accessories

To mount one or two monitors and a WVR-1 receiver to the back of the

SRH-3 Remote Control you need following parts:

• one or two RMB-2

K2.66250.0

mounted at the back of the Remote Control

• one 19mm rod, like the

K2.0014954

For the monitor and receiver following brackets are available:

• Monitor Adapter for Transvideo

K2.0014831

• Monitor Adapter for Small HD

K2.0014832

• Adjustable Monitor Mount AMM-1

K2.0014829

• Rod Mounting Bracket RMB-5

K2.0014827

To power the monitor with 4pin XLR, the Monitor Power, 12V, Lemo 0B 2pin

K2.0010546

is needed and to power the

K2.0010546

, the Cable RS - RS/PWR IN (0.5m/1.6ft)

K2.0001637 is needed.

NOTE

If users would like a monitor, and the WVR-1 receiver is powered through the SRH-3

remote control, the remote control itself must be powered through the 4pin XLR power

in with 12V from an external battery.

12V Bat Pwr Cable D-Tab 4p XLR

K2.0020467

Support Systems

Price List - EU 05/2018

Ident Nr

Product Description/Weight & Dimensions

Price

Mounting Hardware

2800 Mounting Hardware

In the chapter mounting hardware a lot of adapters, extensions and other useful bracketry is listed.

Shoulder Belt Adapters

K2.0001223

€34

17 gr

Offers compatibility with standard ENG shoulder belts.

Rod Mounting Bracket RMB-2 Set

K0.60209.0

€180

KK.0005807

The Rod Mounting Bracket RMB-2 can be attached to any ARRI 3/8-16 inch interface

and holds a standard 19 mm rod (15 mm rod with a reduction insert).

includes:

K2.66250.0 1x Rod Mounting Bracket RMB-2

K2.66255.0 1x 15mm Reduction Insert

Basic Set 15mm Reduction Insert

K0.60211.0

€130

KK.0005809

The 15 mm reduction insert can be fitted to any 19 mm rod mount to allow

compatibility with 15 mm rods.

includes:

K2.66255.0 5x 15mm Reduction Insert

Pro Set 15mm Reduction Insert

K0.60210.0

€230

KK.0005808

The 15 mm reduction insert can be fitted to any 19 mm rod mount to allow

compatibility with 15 mm rods.

includes:

K2.66255.0 10x 15mm Reduction Insert

The 15 mm reducing insert can be fitted to any 19 mm rod mount to allow

compatibility with 15 mm rods.

15mm Reduction Insert

K2.66255.0

€27

The 15 mm reducing insert can be fitted to any 19 mm rod mount to allow

compatibility with 15 mm rods.

216

Page

Accessories

Содержание SRH-3























































Результаты поиска

Содержание SRH-3

Отзывы:

Похожие инструкции для SRH-3

Бренды по названию

Популярные бренды

ARRI SRH-3, Руководство пользователя

Результаты поиска

Содержание SRH-3

Отзывы:

Похожие инструкции для SRH-3

Бренды по названию

Популярные бренды