!
20
!
7.7
Autotune (Beta)
The SRH-3 offers Autotune which will help to find the needed PID values.
Autotune tries to calibrate strength and torque of the motors automatically.
NOTE
Autotune can only be used with camera setups heavier than 8 Kg / 17.3 lbs.
If the camera setup is below 8 Kg / 17.3 lbs, use the default values and set
Power
to
100
.
Touching
Auto
will open a new menu.
7.8
Autotune procedure
This menu allows you to autotune each axis on its own,
or all three axes the same time.
Touching
All PID Tune
for example, will open
this screen.
NOTE
During autotune calibration, the head moves in all
single axes, which can cause vibration and possibly noise.
This is completely normal and there is no need to worry.
When the autotune has been completed, the PID menu
will show up again and will present the actual PID values.
Here you can
accept
the
autotune
PID
values,
by pressing
Save
.
Or you
Discard
the autotune PID values, because they
do not reach your needs.
Autotune (Beta)
NOTICE
This is a Beta Version!
With reference to the BETA END-USER LICENSE AGREEMENT, you must be
aware that currently the expected performance may not be fully achieved.