!
49
!
21.7
Torque
The
Torque
selection will open a new
touchscreen display with a slider to allow the operator
to set the needed
Torque
for the selected lens motor.
21.8
Mode
In the Motor Mode column the motors can be
adjusted from speed to angle measurement.
NOTE
If you use:
a
Focus Wheel
, the mode should be set on
Position
.
a
Iris Slider
, the mode should be set on
Position
.
a
Zoom Rocker
or the joystick for zoom, the mode
should be set on
Speed
21.9
Calibration
By touching Calibrate, every singe motor will be calibrated.
NOTE
Green
indicate that the motor had been calibrated.
Red
indicate that the motor needs to be calibrated.
Quick setup procedure for cforce motors
• Mount the motors to the camera
• Connect each motor through LBUS cables
• Press the
FIZ
button at the motors to assign each motor to Focus, Iris or Zoom
• Touch
FIZ
in the Home Screen
• Touch the field below the desired FIZ function
• Assign the desired FIZ controllers to the wanted lens motors
• Enter the
Main Menu
and select
FIZ
• Check if the lens motors are switched on
• Adjust the Torque. (minimum 2)
• Check the motor mode (Focus and Iris is
Position
, Zoom is
Speed
)
• Touch Calibration
FIZ
