!
26
!
9.2
Direction
This selection will open a new touchscreen that allows
you to change the direction of the control device from
standard to reverse for offset rate.
NOTE
The center position shows the actual selection.
Touching Rev in this case will reverse the direction of
the assigned controller.
9.3
Deadband
This selection will open a new touchscreen slider that allows
you to change the amount of Deadband for the selected offset
rate on each axis.
NOTE
Deadband is defined as delay before the
control device activates the selected function.
9.4
Sensitivity
This selection will open a new touchscreen slider that allows
to change the sensitivity of the control device for offset
rate on the selected axis.
Offset
