ARRI ALEXA 35 Скачать руководство пользователя страница 84

Страница: 84 / 117

Network

where the italic parts need to be replaced with your network credentials.
► Select

MENU > System > Network / WiFi > WiFi Network > SCAN QR

► Hold the QR-Code in front of the lens so that it fills the frame and is in focus.

A popup window with QR-Code data is displayed.

► Press

CONNECT

Disconnect from Network (Client Mode)

► Select

MENU > System > Network / WiFi > WiFi Network

► Press

DISCONNECT

If the network you were connected to is hidden, it will disappear from the network list shortly after.

20.2 Ethernet Settings

LAN IP Mode

► Select

MENU > System > Network / WiFi > LAN IP Mode

Following options are available:

Static

Select for manually entering an IP address and subnet mask.

DHCP

Select to let the camera accept a dynamically assigned IP address from an DHCP server.

LAN Static IP

► Select

MENU > System > Network / WiFi > LAN Static IP

to set the desired LAN Static IP adress.

LAN Static Subnet

► Select

MENU > System > Network / WiFi > LAN Static Subnet

to set the desired LAN Static subnet.

20.3 Streaming Metadata

The camera supports to stream real time metadata via Ethernet, to be used in virtual studios (aka

volumes with an LED wall, aka mixed reality production systems). For more information please refer to

the ARRI Live Link Metadata Manual, available in the

White Papers

section on the ARRI website.

Streaming Addressing

► Select

MENU > System > Network / WiFi > Streaming Metadata > Streaming Addressing

to set the

type of addressing.
Following options are available:

Unicast
Multicast

The metadata is transmitted from the camera to an endpoint via any nodes.

The metadata is transmitted to multiple recipients or to a closed group of recipients.

Streaming Address

► Select

MENU > System > Network / WiFi > Streaming Metadata > Streaming Address

to set the

destination IP address.

Info:

When streaming addressing is set to Multicast, the allowed address range is within IP subnet

239.192.0.0/16.

Содержание ALEXA 35






















































































































Результаты поиска

Содержание ALEXA 35

Отзывы:

ARRI ALEXA 35, Руководство пользователя, Страница: 84 / 117

Результаты поиска

Содержание ALEXA 35

Отзывы: