ARRI ALEXA 35 Скачать руководство пользователя страница 23

Страница: 23 / 117

Menu Operation

Clip Information

Displays the current reel name, the current clip number and the duration of the current clip (while record-

ing) or of the last recorded clip (during standby).

Battery Status and Texture

Displays the status of the power inputs and the active texture.

Media Capacity & Recording and Look Settings

Displays the remaining capacity of the recording medium, the active recording processing (ARRIRAW or

LogC4) and the active look file.

Status Icons:

The microphone icon indicates that the internal

microphones are active.

Internal microphones are muted.

WiFi is active and in client mode. The camera

is connected to a network.

WiFi is active and in client mode. The camera

is not connected to a network.

WiFi is active and in host mode.

The ARRI ECS White Radio is active and uses

the displayed channel number.

MVF-2 Lock Icon. MVF-2 buttons are locked.

Camera Lock Icon. Camera buttons are locked.

The Genlock icon indicates that the camera is

synchronized to a Genlock or timecode signal.

The icon turns orange when the source signal

is missing or is not usable.

The MVF-2 eyepiece heater is on. The icon

turns gray when the heater is not heating (eye-

piece temperature is > 15 °C (59 ° F)).

The CAL icon indicates that a lens motor cali-

bration is required. The icon turns black when

calibration is in progress and expires when cal-

ibration has finished.

Indicates that the LDS interface is disabled.

The USB icon indicates a connected USB

medium. The icon turns gray when the medium

is read only, and orange if the medium is not

usable.

The Frame Grab icon indicates active frame

grabbing. The icon turns orange if frame grab-

bing failed (e.g. no USB medium is inserted).

The temperature icon indicates that the camera

temperature is increased. The icon turns red

when the camera temperature is out of range.

The fan icon indicates that the camera needs

to increase the fan speed above 20 dB noise

emission level. The icon turns orange when the

fan speed exceeds 20 dB.

Indicates an active alert state. See

MENU > Alerts

for detailed information.

Содержание ALEXA 35






















































































































Результаты поиска

Содержание ALEXA 35

Отзывы:

ARRI ALEXA 35, Руководство пользователя, Страница: 23 / 117

Результаты поиска

Содержание ALEXA 35

Отзывы: