ARRI ALEXA 35 Скачать руководство пользователя страница 77

Страница: 77 / 117

System Settings

18 System Settings

18.1 Language Setting

► Select

MENU > System > Language

to set the system language between

English

and

Chinese

(simplified).

18.2 System Time and Date

► Select

MENU > System > System Time + Date

to set the system time and date.

18.3 Button and Display Settings

► Select

MENU > System > B Display

> Display Style to set the display style between

Day

Night

► Select

MENU > System > B Display

> Button Brightness or

► Select

Side Display > Settings > Button Brightness

to set the brightness of camera and MVF-2 buttons from

(off) to

(the highest brightness).

18.4 Fan Settings

Select to set the fan mode to

Low Noise

for locations with ambient temperatures up to 30°C (86°F). For

locations with ambient temperatures higher than 30°C (86°F), set to

Rec Low

► Select

MENU > System > Fan Mode

Following options are available:

Rec Low

Increases fan speed during standby to cool the camera. Minimizes fan speed/noise during
recording. Ideal in an environment warmer than 30 °C (86 °F).

Low Noise

Minimizes fan noise during standby and recording.

Info

: With data rates above 100 MB/s (due to fps/codec setting), the fan speed automatical-

ly increases to prevent the camera from overheating.

18.5 Reset of Electronic Horizon

► Select

MENU > System > Reset Electronic Horizon

► Place the camera on a level surface and press

RESET

Info:

A message is displayed if either the roll, the tilt or both values exceed the calibration range

and resetting is not possible.

18.6 Update

NOTICE

Use a fully charged battery or a mains power supply to avoid power loss during updates.
Do not switch off the camera or unplug power during update processes.
Do not disconnect or remove components that are being updated.

Содержание ALEXA 35






















































































































Результаты поиска

Содержание ALEXA 35

Отзывы:

ARRI ALEXA 35, Руководство пользователя, Страница: 77 / 117

Результаты поиска

Содержание ALEXA 35

Отзывы: