ARRI ALEXA 35 Скачать руководство пользователя страница 79

Страница: 79 / 117

System Settings

► Select the LBUS device you want to update and press

UPDATE

► Press

CONFIRM

to start the update. Cancel with

BACK

18.6.4 Update of Codex Compact Drive

The camera supports to update Codex Compact Drives. Updating does not require a dedicated update

file. The camera will issue a message if the firmware version of the inserted drive needs to be updated.

NOTICE

All data contained on the drive will be deleted by the update. Make sure that you have

backed up all data before starting the update.

► Select

MENU > System > Update

The

Update Media

entry shows the software version installed on the inserted Compact Drive, and

the software version required by the currently installed camera software.

► Select

Update Media

to update the inserted Compact Drive.

► Press

CONFIRM

to start the update.

Info:

After the update, the camera must be rebooted to be able to record and resume normal operation.

However, if additional drives need to be updated, no reboot is required, you can proceed directly with

the update of the next drive.

18.6.5 Update of PDM-1

The camera supports to update the Power Distribution Module PDM-1. Updating does not require a

dedicated update file. The camera will issue a message if the firmware version of the PDM-1 needs to

be updated.

► Select

MENU > System > Update

The

Update PDM-1

entry shows the software version installed on the PDM-1, and the software

version required by the currently installed camera software.

► Select

Update PDM-1

to update the PDM-1.

► Press

CONFIRM

to start the update.

Содержание ALEXA 35






















































































































Результаты поиска

Содержание ALEXA 35

Отзывы:

ARRI ALEXA 35, Руководство пользователя, Страница: 79 / 117

Результаты поиска

Содержание ALEXA 35

Отзывы: