manualshive.com logo in svg

ARRI ALEXA 35, Руководство пользователя, Страница: 10 / 117

Поделиться
Скачать
ARRI ALEXA 35 Скачать руководство пользователя страница 10

Camera Body Overview

10

connector supports hot plugging and comes without a key, so the viewfinder cables plug in regardless

of the connector's orientation.

SDI 1 & SDI 2 / RET IN (BNC)

Both SDI BNC connectors can be configured to output the following video signals:

422 1.5G HD
422 3G HD
444 3G HD
422 6G UHD
422 12G UHD
444 12G UHD

(23.976, 24, 25, 29.97 and 30 fps progressive or psf) according to SMPTE ST 292-1:2012
(48, 50, 59.94 and 60 fps progressive) according to SMPTE ST 425-1:2014
(23.976, 24, 25, 29.97 and 30 fps progressive) according to SMPTE ST 425-1:2014
(23.976, 24, 25, 29.97 and 30 fps progressive) according to SMPTE ST 2081-10:2015
(48, 50, 59.94 and 60 frames fps progressive) according to SMPTE ST 2082-10:2015
(23.976, 24, 25, 29.97 and 30 fps progressive) according to SMPTE ST 2082-10:2015

The SDI 2 / RET IN connector can be configured in the camera menu to function either as SDI output or

as a Return In input, accepting 1.5G and 3G SDI signals.

SYNC IN (BNC)

The SYNC IN connector is a BNC connector for input of reference signals and accepts analog black

burst signals and tri-level HD signals for camera synchronization.

TC (5-pin LEMO)

The TC connector accepts and outputs LTC (Longitudinal Timecode) signals. 

White Radio Antenna Connector (Female RP-SMA)

White radio allows for wireless lens control, lens data communication and remote control of camera

functions using the hand units of the ARRI Electronic Control System.

RS (3-pin Fischer)

The RS connector outputs regulated 24 V accessory power and can supply external devices with a load

of up to 3.0 A. Additionally, the RS connector outputs a shutter pulse signal and can be used to send a

remote start/stop signal to the camera.

12V (2-pin LEMO)

The 12 V output with a 2-pin LEMO connector supplies accessories with regulated 12.0 V with a

maximum current of 2.0 A.

PWR (8-pin LEMO)

The PWR connector is the main power input for the ALEXA 35 and accepts an input voltage range from

20.5 to 33.6 V DC. You can use power cables KC50-S (K2.75007.0) or KC50-SP-S (K2.0001275) to

power the camera from an external source.

ETH (10-pin LEMO)

The ETH Ethernet connector is used for camera remote control, metadata streaming and service

purposes. It supplies regulated 24 V with a current of 0.5 A. Use the ALEXA Ethernet Cable KC 153-S

(K2.72021.0) to connect the camera to a standard RJ-45 Ethernet port. 

AUDIO (6-pin LEMO)

The AUDIO connector is a 2-c24 dBu line level audio input with an additional regulated 12

V power output with a current of up to 0.5 A. Use the ALEXA Mini LF Audio connector with cable

(K2.0023988) to connect audio sources.

Содержание ALEXA 35






















































































































Отзывы:

Нет отзывов