ARRI ALEXA 35 Скачать руководство пользователя страница 58

Страница: 58 / 117

Recording

to adjust the gain in steps of 1.0 dB for each channel which has either

Line In L

Line In R

assigned as source.

User Buttons

Audio Ch1 Increase, Audio Ch1 Decrease, Audio Ch2 Increase, Audio Ch2

Decrease

support to quickly adjust gain of channels 1 and 2.

User Button

Audio Mute int. Mic

supports to mute the internal microphones.

Info:

Gain adjustment is not available for channels to which the internal microphones or the

Audio Extension Module AEM-1 are assigned as source. The internal microphones use a fixed,

nonadjustable gain, the gain of the signals applied to the AEM-1 must be set on the AEM-1 itself.

Headphones Routing and Headphones Volume

► Select

MENU > Recording > Audio Recording > VF Headphone Routing > Channel 1

► Select

MENU > Recording > Audio Recording > VF Headphone Routing > Channel 2

► Select

MENU > Recording > Audio Recording > VF Headphone Routing > Channel 3

► Select

MENU > Recording > Audio Recording > VF Headphone Routing > Channel 4

to configure the routing of audio channels to the headphones.
Following options are available:

Off
L
L + R
R

The audio channel is not output on the headphones.

The audio channel is output on headphones left.

The audio channel is output on headphones left and right.

The audio channel is output on headphones right.

► Select

MENU > Recording > Audio Recording > VF Headphone Volume

to adjust the volume of the

headphones connected to the MVF-2.

Reference Tone

A 1 kHz sine reference tone can be output on the SDI outputs and the headphone outputs of MVF-2

and AEM-1. If a recording is started during this time, the test tone is also recorded in all active audio

channels of the clip.
► Select

MENU > Recording > Audio Recording > Reference Tone

Following options are available:

Off

-9 dBFS

18 dBFS

-20 dBFS

Info:

The reference tone can only be activated when audio recording is enabled.

12.8 Rec Beeper and Tally

► Select

MENU > Recording > Rec Beeper / Tally

Following options are available:

Rec Start Beeper
Rec Stop Beeper
Media Full Beeper

The camera gives an acoustic indication at start of recording.

The camera gives an acoustic indication at stop of recording.

The camera gives an acoustic indication for stopping recording due to full recording medi-
um. For better distinction, a different sound pattern than the start/stop beeper is used.

Tally MVF-2

Enables the tally light on the MVF-2.

Содержание ALEXA 35






















































































































Результаты поиска

Содержание ALEXA 35

Отзывы:

ARRI ALEXA 35, Руководство пользователя, Страница: 58 / 117

Результаты поиска

Содержание ALEXA 35

Отзывы: