ARRI ALEXA 35 Скачать руководство пользователя страница 74

Страница: 74 / 117

Synchronization

16 Synchronization

The camera's sensor and SDI outputs can be synchronized to either

a genlock signal (a tri-level HD signal or an analog black burst sig-

nal) present at the BNC SYNC IN connector (1) or a timecode signal

present at the 5-pin LEMO TC connector (2). The camera's sensor

needs to run at equal or double the frame rate of the reference signal

to establish synchronization.

► Select

MENU > System > Sensor > Genlock Sync

Following options are available:

Off
Sync In
Timecode

Synchronization is not enabled.

The camera will synchronize to a tri-level or black burst signal present at the SYNC IN connector.

The camera will synchronize to timecode present at the TC connector.

Active synchronization is indicated by the Genlock icon on the HOME screen and in the

Status Info. The icon turns orange when the camera cannot synchronize to the reference

signal or when no signal is present. See

MENU > Alerts

for detailed information.

Info:

Simultaneous use of the timecode mode

Jam-sync

and

Genlock Sync

is not supported.

Sync Shift

The Sync Shift setting can be used to apply an offset to the reference signal at the input. The minimum

step size is 52 ns and the maximum correction is +/- 20 ms (= 384000 steps), depending on the sensor

frame rate.
► Select

MENU > System > Sensor > Sync Shift

to set the sync shift.

Содержание ALEXA 35






















































































































Результаты поиска

Содержание ALEXA 35

Отзывы:

ARRI ALEXA 35, Руководство пользователя, Страница: 74 / 117

Результаты поиска

Содержание ALEXA 35

Отзывы: