Aros SIRIO EASY 1500, Инструкция по установке и эксплуатации

Страница: 45 / 60

- 45 -
The menu is organised on three levels, as shown in the previous figure.
To scroll through items within a level, use the ↑ and ↓ keys.
To enter the selected menu, press
.
Unless otherwise specified,
in menus with two levels, press the
button on level 2 to return to level 1;
in menus with three levels, press the
button on level 3 to return to the level 2 menu „exit‟ screen.
Pressing and holding
(for more than 1.5 s) will return the user to the „home menu‟.
‘HOME’
M
ENU
This is the inverter default menu and displays information of immediate interest on the first line:
„Pac‟: The active power fed to the grid
„Qac‟: The reactive power supplied with the grid
„PF‟: The power factor
„Eday‟: Energy produced on the current day
„Etot‟: Total energy produced
„Hday‟: Hours of operation on the current day
„Htot‟: Total hours of operation
Current status: one of the status conditions described in the Operation logic paragraph.
„LAST STOP INFO‟: reason for the last feeding interruption.
The system clock and any error messages are displayed on the second line.
During the verification phases before grid connection, the menu automatically switches to current status mode. Once feeding has
started, it displays the active power fed to the grid.
‘MEASURES’
M
ENU
This menu shows the electrical inputs and outputs of the inverter in detail:
Input screens:
instantaneous values:
„DC xxx.xV xx.xA‟: this line describes the MPPT status
maximums recorded:
„DC Wmax‟: This line shows the maximum power value recorded by MPPT on the current day
Output screen:
„AC xxx.xV xx.xA‟: This line shows the instantaneous values of the mains voltage and the current emitted to the grid.
„XxxVavg xx.xxHz‟: This line shows the average mains voltage of the last 10 minutes and the instantaneous grid
frequency.