Aros SIRIO EASY 1500, Инструкция по установке и эксплуатации

Страница: 32 / 60

- 32 -
S
AFETY INSTRUCTIONS
Risk of electric shock
The device contains high voltages, both alternating and direct, and high leakage currents may be
generated during operation. To avoid risk of electric shock during maintenance or installation, make sure
that all DC and AC connection terminals are disconnected. First connect the grounding wire to grounding
and disconnect it last for maintenance. Check proper phase and neutral connection. If the unit is used
without following the specifications of the manufacturer, the protection provided by the equipment may be
impaired.
Disconnect the inverter from the grid and from the photovoltaic generator before cleaning photovoltaic
modules: an unexpected capacitive current from the surface of the modules may surprise operators and
cause them to fall from the roof.
Handling the photovoltaic inverter
The photovoltaic inverter must only be handled by qualified service personnel. When the photovoltaic
generator is exposed to sufficient light intensity, it generates a DC voltage and, when connected to the
device, it charges the bulk capacitor. After having disconnected the photovoltaic inverter from the grid and
the photovoltaic generator, an electric charge may remain in the bulk capacitor. Please wait at least 10
minutes after disconnecting from the grid before handling.
Exclusively for the grid
The PV inverter is designed for the sole purpose of converting energy from PV modules and injecting it into
the grid. This inverter is not designed to be powered by sources of primary energy other than PV modules
or to be connected to different loads other than the public grid.
Hot surfaces
Although it has been designed in accordance with international safety standards, the photovoltaic inverter
may become hot during operation.
L
IMITED GUARANTEE
The equipment you have purchased has been constructed according to the most modern techniques and was rigorously tested
before leaving the factory.
During the guarantee period, the manufacturer shall repair or replace parts that prove defective, provided that such defects have
not been caused by incompetence or negligence of the buyer, fortuitous events or force majeure (lightning, fire, flood, etc.),
incorrect or inadequate installation other than as stated in the manual, unsuitable transport or delivery, opening of the unit by
unqualified personnel or breaking the closure seal, modification, testing or unauthorised repair, use or application beyond the
limits defined by the manual, or application beyond those defined by safety standards (VDE, UL, etc.).
It is the responsibility of the person applying for technical assistance from Customer Service to provide detailed information about
the detected failure or malfunction.
The repair and/or replacement of parts or the device shall be implemented in accordance with the discretion of the supplier.
Any repair under guarantee will be performed by the manufacturer or an authorised service centre. Equipment must arrive at the
risk and expense of the customer in its original packaging so as not to cause further damage.
If repairs must be performed directly at the customer's premises, the customer shall be charged for expenses and hours of travel,
while the costs of labour and parts shall be borne by the manufacturer. This guarantee does not in any case cover the
replacement of equipment or compensation for any direct or indirect costs or claims for damage caused by device malfunction.
© No part of this manual may be reproduced without the prior permission of the manufacturer.
For the purpose of improvement, the manufacturer reserves the right to change the product described at any time and without notice.