TWOJE ŹRÓDŁO ENERGII
|
36
INSTRUKCJA OBSŁUGI
/ MANUAL
MODUŁY BATERYJNE
/ BATTERY PACK
PL
EN
1.9
Multiple Battery Pack modules setup
WARNING
: After properly connecting the Battery Pack, the UPS display will only show its operating status.
Battery, load, voltage etc. of an additional Battery Pack will be displayed but may not be correct.
1.9.1
Installation of multiple Battery Packs and a UPS on stands (tower)
This method of connecting the Rack uninterruptible power supplies with the BPs applies only to Battery
Pack B/0609/R and B/0409/R models. These battery modules have stands for stable BP and UPS
installation UPS on even, flat surfaces.
1)
Using the included elements, extend the stands and place them on an even, flat surface.
2)
Lift* both UPS and Battery Pack, then slowly lower them vertically on the stands.
