Aristo ARISTOMAT SL 1310, Руководство пользователя

Страница: 78 / 122

3-20 Material transport systems
Material winding systems
•
with light weight rolls - locate the shaft first in the right side bearing
bracket and than, on the left side, insert the drive flat vertical in the drive
slot.
medium weight rolls should be handled by two persons each holding
one end of the shaft and carefully lowering it into its bracket. CAUTION
- danger of bruising!
lower the heavy material roll carefully with the hoist into the two
bearing brackets.
CAUTION: When lowering the roll too fast, dropping it, the bear-
ings or brackets may damage.
Note: The actuation ring for the safety switch must be seated correctly
in its groove.
•
unroll the material into a loop and lay it onto the cutter table top.
•
set the mode select switch on the electronic control to AUTO .
•
press green Drives ON switch.
The material unwinds automatically until the light barrier detects the
loop.
• switching on the vacuum.