Aristo ARISTOMAT SL 1310, Руководство пользователя

Страница: 40 / 122

2-24 Basic Elements of the ARISTOMAT SL
Menu Settings: Menu Level 1
Menu Level 1
Parameter settings: Example SPEED
For numerical entries a cursor (^) is set under the relevant digit to change
by using the direction keys
< and > . The number can then be updated by
using the direction keys ∧ ∧
∧ ∧ ∧
and ∨. ∨.
∨. ∨. ∨.
SPEED 1000 * +
<—> [0.1%] ^ -
The set value is marked with an * (asterisk). When a value is altered
confirm the new setting by pressing the ENTER key. When recalling the
menu the new value is marked with the *.
Using the ESC key after altering a value will not store such value, the
previous value is maintained.
PARAMETER
The PARAMETER submenus offer settings which may influence plot quality
and plot time.
•
press F1 PARAMETER for parameter settings.
• with the function keys ( F1-F4) get to the following submenus:
ANGLE
The angle setting effects the directional blade control and is of great im-
portance to obtain perfect cutting results.
The set angle defines an angle break between lines at which the tool halts,
lifts and turns before cutting the following line.
NOTE: The factory settings (Upper angle 20 degrees, lower angle 10 de-
grees) are recommendable for the most materials.
When using thick materials (i.e. sand blast mask) it is recommended to
decrease the angle setting to ensure that the blade is lifted more often.