Aristo ARISTOMAT CL 1310, Руководство пользователя

Страница: 9 / 56

ARISTOMAT CL 11
Safety Instructions
•
Always remove tools from tool heads before assembly (disassembly)
- danger of injury.
•
Carry out a blade changeover thoroughly. Handle with care, you might
hurt yourself with the sharp knife. Worn down and broken blades can
also cause injuries.
Separate the machine from electricity mains, when
•
repairing or servicing the ARISTOMAT
Turn off the main power switch, when
•
changing a tool head
Turn off the drive system, when
•
changing a tool, such as blades
•
loading new material and/or lining up material
If the drive system is under power,
•
maintain a sufficient safety distance (no less than 8 inches) from the
moving bridge over the entire motion area: Do not lean over the table top
or rest on it and do not move under the ARISTOMAT.
•
do not place objects in the danger area
•
do not look directly inside the laser beam of the laser pointer
In oscillation mode
•
work with the oscillation-mode down holder only as has been dictated
from the factory.
Consider during dust formation
During the processing of various materials, health hazardous, mist or
stream can be released (see safety data sheet of material manu-
facturer). This must be taken into consideration in the choice and usage
of an exhaust appliance.
The exhaust appliance must be approved for the respective dust
category according to DIN EN 60335-2-69 Anh. AA and
E DIN IEC 61 J/94/CD. With the release of carcinogenic substances
(or substances under suspicion of causing cancer) the exhaust
appliance must be approved for dust category H according to the
Ordinance on Hazardous Substances (§ 35 u. § 15a GefStoffV).