Aristo ARISTOMAT CL 1310, Руководство пользователя

Страница: 40 / 56

42 ARISTOMAT CL
Menu Settings: Menu Level 2
Menu Level 2
SAVE
•
press F1 SAVE.
•
with the function keys ( F F4) get to the following submenus:
Save customer configurations
Press F3 to save the current plotter settings. After switching on the ARIS-
TOMAT the saved parameters are re-used until the are replaced by oth-
er values.
Factory configuration
Press F4 to adjust the ARISTOMAT to standard parameters which are
defined from factory:
Contact force 10
Acceleration 100
Baud rate 9600
7/8 BIT 8 BIT/BYTE
C-Offset 0 (MultiHead OT.T.M.P.)
Rot. option Standard rotation
Format DIN A3
Upper acceleration 100
Upper speed 1000
Speed depending on the tool head (max. 1000)
Filter Level 2
Feed correction (+) 0
Feed correction (-) 0
Material Thin
Feed length depending on the plotter type
(max. plotter length)
Knife 1 Knifeedge
Origin Swing Off
Upper angle 20°
Parity NONE/1 STOPBIT
Plotter type ARISTO
Protocol XON/XOFF
Lower option Perform lower
Speedbooster No
Spline OFF
Language English
Overcut 0