Aristo ARISTOMAT CL 1310, Руководство пользователя

Страница: 43 / 56

ARISTOMAT CL 45
Menu Settings: Menu Level 3
Menu Level 3
Setting parameters of machine
Factory settings of the ARISTOMAT can be changed and saved as cus-
tomer configuration.
•
with the function keys ( F F4) get to the following submenus:
MATERIAL WIDTH
Settings avoid plotting outside the material. Depending on the machine
origin the working area of the tool carriage is limited to the value set.
Values between 1 mm and the maximum working area are possible.
LOWER OPTION
In order to plot without lowering the tool it is possible to choose IGNORE
LOWER at the menu item LOWER OPTION. This option is useful to
restart an aborted plot at a requested point. The plot should be restarted
with the lifted tool and halted with the
STOP key at that point. With the
option PERFORM LOWER, the plot will go on normally.
ORIGIN SWING
With this function a too strong demand of the Conveyor can be avoided
by production-conditioned cutting on always the same place of the Con-
veyor. Hereby it is possible to let the zero point move in an adjustable
area with adjustable steps. With each repeat of the plot is then shifted
the origin a piece. The input takes place in millimeter.
F3 WIDTH: here an area is specified, within which the origin is to move.
F2 STEP: with the value entered here the plotter calculates the number
of steps in that before selected area.
F1 ON/OFF: activate and deactivate the funktion.
Example: WIDTH = 15 mm, STEP = 5 mm